Why Your Lender’s Numbers Don’t Match Yours, And Who’s Right
Learn when to compromise and when to hold firm on your math.
Tennessee, Goliath Teammate
Key Takeaways
- A lender's ARV, rehab budget and MAO differ from a flipper's because the lender prices its own risk of default, not the flipper's profit potential.
- Lenders typically base ARV on the median comp rather than the highest one, and budget rehab with per-square-foot estimators at retail-level pricing.
- On a $200K purchase with $80K rehab and a $400K ARV, a lender capped at 70% of ARV has $280K of total exposure, which leaves $200K for the purchase after the $80K rehab.
- Where a flipper assumes 6 months of financing (4 months rehab, 2 months to sell), a lender often assumes 9–12 months of carry, which raises interest reserves and lowers the loan.
- The smartest use of a lender's numbers is a stress test: if the deal only makes money when everything goes right, the lender's version may save you from a loss.
You ran your numbers. They made sense. Then the lender came back with a different ARV, a different rehab, and sometimes an entirely different MAO.
A mismatched lender number is frustrating, especially when you’re confident in your comping and construction numbers.
But here’s the key:
You and your lender are playing two different games.
And the numbers reflect each party’s risk, not necessarily who’s right or wrong.
Leverage is common in flipping, so this gap matters to a large share of deals. ATTOM's 2025 year-end home flipping report found 37.7 percent of flipped homes were purchased with financing in 2025, up from 36.9 percent in 2024, and the typical flip earned a 25.5 percent gross ROI before expenses (bought for a median $259,019, resold for $325,000) (ATTOM, 2026).
In this article, we’ll cover:
- Why lenders use different underwriting formulas
- How to reconcile their numbers with yours
- When their numbers signal a real problem vs. just a conservative stance
- How to use both sets of numbers to build smarter offers
Number | Your assumption as the flipper | Your lender's assumption |
|---|---|---|
After Repair Value (ARV) | Aggressive but realistic comps plus your improvements and finishes | The median comp, trimmed for appraisal risk and quick resale in a default |
Rehab budget | Tight, from known contractors and value-engineered choices | Higher: GC markup, permit risk, unknown subs, contingency padding |
Leverage | 90% of purchase + 100% of rehab | Max 70% of ARV in total exposure |
Timeline | 4 months rehab + 2 months to sell = 6 months | 6 months rehab + 3+ months to sell = 9–12 months of carry |
Profit margin | 15%–20% net profit with a thin buffer | At least a 10% margin after liquidation discount; some won’t fund under 12% projected profit |
Why do you and your lender have different objectives?
What is your objective as a flipper?
- Maximize ROI
- Stay inside a safe margin
- Use leverage to increase deal volume
- Make calculated risks where profit potential justifies it
What is your lender’s objective?
- Minimize loan default risk
- Ensure collateral (the property) protects them
- Get repaid regardless of your outcome
- Stay compliant with internal and external underwriting standards
Even if you’re both looking at the same deal, your incentives are not aligned: a flipper is paid from profit, and a lender is paid from repayment.
That’s where the number gap starts.
Where exactly do your numbers and your lender’s numbers differ?
Your numbers and your lender’s numbers differ in five places: ARV, rehab budget, LTV versus LTC structure, timeline, and profit margin.
1. Why is the lender’s After Repair Value (ARV) lower?
Your number: Based on aggressive but realistic comps, plus your improvements and finishes. You might expect top-of-market results with good marketing.
Their number: Often based on the median comp, not the highest one. Lenders typically trim down for appraisal risk and conservative resale assumptions.
Why ARV differs:
- Lenders don’t assume you’ll get top-dollar
- They may use older or broader radius comps
- They’re more concerned with what they could resell it for quickly in a default
Who’s “right”? You might be. But unless you can show extremely strong comp support, the lender’s number wins, because their capital is at risk.
2. Why is the lender’s rehab budget higher?
Your number: Tight, optimized, based on known contractors, value-engineered choices, and possibly even doing some work yourself.
Their number: Higher. A lender’s rehab budget may include GC markup, permit risk, unknown subs, and contingency padding.
Why the rehab budget differs:
- Lenders often use per-square-foot estimators that reflect national or regional averages
- They assume retail-level pricing, not investor discounts
- If you’re newer, they may assume you’ll make mistakes or face delays
Who’s “right”?
Possibly you, if you’ve done similar projects with the same team. But from a risk mitigation standpoint, the lender's conservative estimate makes sense.
3. How do Loan-to-Value (LTV) vs. Loan-to-Cost (LTC) limits change what you can borrow?
This is where the structure of your loan changes how much you can borrow.
You might say:
- Purchase: $200K
- Rehab: $80K
- ARV: $400K
- You want: 90% purchase + 100% rehab
Lender says:
- Max 70% ARV = $280K total exposure
- They subtract the $80K rehab → leaving $200K for purchase
- If they think rehab is $100K, they drop the purchase coverage
Why the loan structure matters:
- You may think they’re underestimating your capacity, but they’re protecting their downside
- They lend against their appraised ARV, not yours
- If your ARV is 10% higher than theirs, you’ll feel “shorted” on leverage
4. Why are the lender’s timeline assumptions longer?
You assume:
- Rehab: 4 months
- Sell: 2 months
- Total: 6 months of financing needed
Lender assumes:
- Rehab: 6 months
- Sell: 3+ months
- Carry: 9–12 months
The longer timeline affects:
- Interest reserve requirements
- Cost of capital
- Your debt service ratio
Why?
- Lenders base projections on what typically happens, not what you hope happens
If you’re on a tight budget and their timeline estimates are longer, it will inflate perceived risk, and reduce what they’ll lend.
5. What profit margin do lenders expect?
You may be targeting:
- 15%–20% net profit
- High leverage
- Thin buffer (but confident in your numbers)
They want:
- Enough spread that they still get paid if you don’t
- At least a 10% margin after liquidation discount
- You have to have “skin in the game” (cash invested)
This is why some lenders won’t fund flips with under 12% projected profit, even if the flipper is fine with it.
Lenders don’t fund your risk tolerance. They fund theirs.
How do you handle a deal when your lender disagrees?
You handle a lender disagreement in three steps: ask questions instead of arguing, bring a deal package that bridges the gap, and switch lenders when the mismatch is structural.
1. Why should you ask questions instead of arguing?
Instead of saying, “Your ARV is too low,” try:
- “Can you show me the comps you used?”
- “Which rehab line items are causing the variance?”
- “What assumptions are driving the timeline?”
Asking questions opens a conversation, and you may uncover valuable insights.
Sometimes, lenders use a better comp you missed.
Other times, they simply pulled data from a generic AVM or lazy appraiser.
2. What goes in a deal package that bridges the gap?
Bring data that supports your version of the numbers:
- Comps with photos, distance, DOM, and finishes circled
- Contractor bids with an itemized labor/materials breakdown
- Project timeline with a realistic buffer and an exit plan
- Recent successful flips in the area (yours or others)
A complete deal package shows professionalism and can help you negotiate better terms.
3. When should you switch lenders?
If a lender’s underwriting is too conservative for your model, that’s not a failure; it’s a mismatch.
Some lenders:
- Prefer cosmetic flips only
- Penalize rural or low-density areas
- Won’t fund anything with foundation work
- Want 20% equity minimums no matter what
If your flips consistently get lowball valuations from them, shop around.
There are aggressive hard money lenders, risk-tolerant private lenders, and even family office-backed capital for experienced flippers.
Who’s actually “right”?
Who’s right depends on who’s more likely to be wrong.
Ask yourself:
- Have you flipped similar homes in similar areas before?
- Have your past projects met or beat your own estimates?
- Do you have repeat vendors, GCs, and buyers in your ecosystem?
If yes, you may have more accurate numbers than your lender.
But if you:
- Are new to the market
- Are using a new contractor
- Haven’t flipped this property type before
- Are guessing on rehab or resale pricing
Then your lender’s caution may be justified.
How should a smart flipper use the lender’s numbers as a stress test?
A smart flipper uses the lender’s numbers as a stress test, not an argument. Instead of arguing, use your lender’s model as a second opinion:
- Plug their ARV into your MAO calculator
- Use their rehab estimate in a worst-case scenario model
- Run their timeline through your holding cost calculator
Ask:
- Does the deal still make money with their inputs?
- Would you still close it, or does it only work with perfect numbers?
If it only works when everything goes right, their version may save you from a loss.
How do you bulletproof your own numbers before you present a deal?
You bulletproof your numbers with documented comps, an itemized scope, a realistic timeline, a multi-buyer resale plan and your own minimum spread. Make sure you have:
- At least 3 solid comps within 0.5 miles, same bed/bath count, similar finish
- An itemized rehab scope based on a walkthrough or detailed photos
- A realistic timeline based on contractor availability and permit timelines
- A resale strategy with multiple buyer types (retail, landlord, flipper)
- A minimum profit spread based on your standards, not just theirs
If your numbers are strong and backed with documentation, you’ll close more deals and get better rates, regardless of initial friction.
Are you both right, in different ways?
Yes. Your lender isn’t in the flipping business. Your lender is in the repayment business.
So yes, they’re going to be more conservative. But that doesn’t mean your numbers are wrong.
It just means you should:
- Understand where the gaps are coming from
- Learn how to present data that closes those gaps
- Know when it’s time to push… and when it’s time to pass
Because the smartest flippers don’t just trust their numbers blindly. They test them against reality and other people’s money.